Call Us +254 738 703 983 · info@uni-eastafrica.com

COLD ROOMS

Our Insulated Panel form the foundation of our cold/freezer rooms, manufactured with low thermal transmittance in mind.

Our Panels are manufactured with “brilliant white chromadeck”, ready to install with our interlock and/or tongue & groove jointing systems. Once the chromedeck panels have been constructed to specification, we then inject them with polyurethane foam. The chemical reaction that ensues causes the foam to expand, completely filling the interior space within the panel. This process creates a continuous layer of insulation that is not only rigid, but also fully adherent to the inner walls of the panel.

 

The Value Of A Cold Room with Polyurethane Injection.

When insulating the walls, floors and/or ceilings of a cold room,most experts are aiming for that perfect thermal transmittance reading. This value (U-value) needs to be fairly low as it represents the rate at which heat transfers through matter.

Why Our Freezer Rooms Boast Far Superior Insulation
  • 1. The U-value of our panels come in at a favorable 0.019 W/m²·K.
  • 2. Our panels behave well against fire & don’t combust as easily as other insulation methods.
  • 3. Our panels act as a moisture regulating membrane, being water impermeable & vapor permeable.
  • 4. Our panels don’t attract rodents & other living things that could damage the insulation.

UPRIGHT HINGE DOOR COOLERS

Key Model Features

 

  1. Digital Thermostat for accurate temperature control and built in voltage protection.
  2. Low-E Glass for improved insulation, lower running costs and reduced condensation.
  3. EcoMate Polyurethane Insulation foam, water based, Non flammable and Zero ODP.
  4. Fully Adjustable Shelving.
  5. High Efficiency Compressor.
  6. High performance Heat exchanges.
  7. Reversible Door action.

Rhino Cold 390T-Slim Line Cooler

HD580 Half Door Cooler

HD690 Single Door Cooler

HD890 Double Hinge Cooler

HD1140 Double Hinge Cooler

HD1360 Double Hinge Cooler

HD890 Double Sliding Cooler

HD1140 Double Sliding Cooler

SD1360 Double Sliding Cooler

HD520 COUNTER TOP COOLER

  1. Durable Mechanical Thermostat.
  2. Low-E Glass for improved insulation, lower running costs and reduced condensation.
  3. EcoMate Polyurethane Insulation foam, water based, Non flammable and Zero ODP.
  4. Fully Adjustable Shelving.
  5. High Efficiency Compressor.
  6. High performance Heat exchanges.
  7. Reversible Door action.

HD430 VERSATILE COUNTER TOP COOLER

  1. Adjustable Temperature Control.
  2. LED interior light with switch.
  3. Reversible Door Hinge.
  4. Skin Condenser.
  5. Low Noise/Silent running.
  6. Locking Door.

2 DOOR UPRIGHT CHILLER- 1400L

SINGLE DOOR UPRIGHT CHILLER- 700L

  • Inside and outside made of Stainless Steel, Internal rounded corners. 
  • Insulation in CFC free polyurethane high pressure injected. Insulation thickness: 85 mm. 
  • Self-closing doors with magnetic gaskets. Door micro switch. 
  • Electronic front control panel, Evaporator heater and Ventilated cooling. 
  • Tropicalized and extractable “monoblock type” condensing unit (ambient temperature +43°C and relative humidity of 65%). 
  • Completely automatic defrosting and condense water evaporation. Reversible door. Adjustable Stainless Steel feet.
    Standard set up: 3x GN 2/1 Rilsan shelves, door lock

3 DOOR REFRIGERATED COUNTER

2 DOOR REFRIGERATED COUNTER

1 DOOR REFRIGERATED COUNTER

  • Inside and outside made of Stainless Steel. Internal rounded corners. 
  • Insulation in polyurethane. Insulation thickness: 50 mm. 
  • Self-closing doors with magnetic gaskets. 
  • Electronic front control panel. Ventilated cooling. 
  • Tropicalized condensing unit (ambient temperature +43°C and relative humidity of 65%). 
  • Completely automatic defrosting and condense water evaporation. Adjustable Stainless Steel feet.
    Standard set up: Rilsan shelf GN 1/1, 2 Stainless Steel “L” runners for each door and a refrigerated drawer over the compressor compartment.

ICE CUBE MAKER - 37KG/24H

  • The design includes a revolutionary system of propulsion through semi-elastic injectors that prevent the problems of lime and other impurities in the water. 

  • The movement (expansion) of the injectors prevents the lime building up on them and blocking them. 

  • The water pump is designed to adapt perfectly to the machine; in addition it is manufactured using materials to ensure a long service life even in zones where the water is very hard.

  • The body is completely 18/8 stainless steel, and easily removable with an inwards folding door

COLD DRINK DISPENSER

  • Cold drink dispenser that allows the production and dispensing of cold tea, fruit juices and cold coffee. Rectangular tanks make disassembly and cleaning simpler. The limited dimensions of the machine makes it suitable for small outlets too, with the ability to work in extreme conditions with low power consumption.
  • Product mixing with vertical stirrer that prevents the formation of foam
  • Rectangular tanks in polycarbonate 
  • Possibility to adjust the temperature of each tank , Electromechanical operation which makes the machine reliable at any Temperature

SALADETTE - 3 DOORS

  • Greater energy saving and respect for the environment, greater efficiency, greater functionality, greater aesthetic appeal. Cyclopentane foaming agent 45 mm per side. Door with internal embossing for better. Digital thermostat with new energy saving algorithm.
  • Tilted holes in front panel with alternated orientation from bottom to top to guarantee better circulation of incoming and exhaust air.
  • Easily removable condenser filter for smooth maintenance and cleaning. Separated plastic water tray to collect dripping water. Anticondensation thermo-braker on door frame. Supports for GN pans with hook design.

CHEST FREEZER - 621 Liters

  • SN-T Climate Class. 
  • Dual mode (Fridge or Freezer). 
  • Aluminum handle. Painted door sheet. 
  • Led ampule light. Lock. Mechanical thermostat. 
  • Water drain system.
    Included: 3 wire baskets 1 divider and scraper.

BLAST CHILLER 5X

  • Insulation in CFC free polyurethane high pressure injected. Insulation thickness 60 mm. 
  • Self-closing door with magnetic gasket. Electronic front control panel with room probe and temperature core probe.
  • Ventilated cooling with air shaker.
  • Tropicalized and easy extractable condensing unit (ambient temperature +43°C and relative humidity of 65%). Time evaporator defrosting (made at the end of the cycle) and lower condense water tray. 

UNDERCOUNTER REFRIGERATOR - 201L

UNDERCOUNTER REFRIGERATOR - 133L

  • Back bar cooler 2 door and 1 door hinged.
  • 138 Lt. 2 grids +1/+10 °C
  • Execution in painted sheet, double glazed door
  • Interior LED light 
  • Fan assisted cooling Temperature +0/+10° C 2 adjustable shelves for each door
  • Adjustable feet – Refrigerant R600A.

SCOTSMAN ICE MACHINE MXG 438

  • Individual transparent solid cube: each single cube is an artwork:
    crystal clear and perfectly shaped, faithful to the Scotsman
    tradition.
  • Global standard footprint: strictly follows international imperial
    standard commonly adopted in the industry of reference.
  • Agion: the technology that makes products cleaner and longer
    lasting with built-in protection working 24/7 to resist the growth
    of microbes and the development of unpleasant odors.
  • Electronic control: ambient and water temperatures may change throughout the years but your ice will stay the same.
  • External indicator lights: keeps ice maker’s operations under constant surveillance.
  • Front access condenser air filter: a do-it-yourself cleaning operation that saves time and money and makes your ice maker live longer.
  • Clean alert: advises with a blink when it’s time to clean the filter.

SCOTSMAN ICE CUBER

  • Produces individual Gourmet crystal clear supercubes.
    Resistant stainless steel exterior.
  • Simple and reliable electromechanic controls.
  • Front panel in & out airflow (air-cooled model only) for built-in installation.Front access condenser air filter, removable and washable (aircooled version only).
  • Easily accessible front ON-OFF Switch.
  • Routine Maintenance visible alarm light on front panel.
  • PWD – Progressive Water Discharge: pumps excess residual water up to a distance of 15 meters.



JUST UNDERBAR PLAIN TOP

  • Stainless Steel grade 430 satin finish no 4 for sides, top and front grid
  • Galvanized Steel – Rear and Bottom
  • Polyurethane foam injection insulation
  • Robust top and bottom hinges
  • Fully adjustable heavy duty plastic coated shelves
    Digital temperature display with high/low voltage protection
  • All underbars supplied with brake castors
  • Dual thermopane safety glass used for glass doors
  • Adjustable thermostat
  • Auto Evaporation (The condensate is evaporated, hence no need to drain)

JUST UNDERBAR PIZZA TOP

  • Stainless Steel grade 430 satin finish no 4 for sides, top and front grid
  • Galvanized Steel – Rear and Bottom
  • Polyurethane foam injection insulation
  • Robust top and bottom hinges
  • Fully adjustable heavy duty plastic coated shelves
  • Digital temperature display with high/low voltage protection
    Self-closing doors
  • All underbars supplied with brake castors
  • Dual thermopane safety glass used for glass doors
  • Adjustable thermostat 2°C – 6°C
  • Auto Evaporation (The condensate is evaporated, hence no need to drain)

SLUSH MACHINE - PRO DOUBLE BOWL

  • New SUMMIT professional slush machine by SPM Drink Systems is a real technological wonder with high performances and ultramodern design.
  • I-PRO prepares the slush in shorter time than the other traditional machines on the market.
  • I-PRO is designed to offer a machine with high performance and ease to use, designed for the end users? needs.

FROZEN YOGHURT MACHINE - 2 BOWL

  • Compact counter machine
  • Exceptional quality / price ratio
  • LED based electronic key pad
  • HACCP certified
  • Lockable lid
  • Designed to work with water or milk based dried products or with mixtures ready to be poured into the bowl, providing a significant overrun
  • Automatic defrost mode
  • Available in one or two bowl configuration

BREMA ICE MAKER 65KG/24HRS

BREMA ICE MAKER 300KG/24HRS

  • All outputs are calculated on an inlet water temperature of 15?C and an ambient temperature of 21?C.
  • Production results may vary depending on actual water and ambient temperature.
    NOTE Electromechanical – No PC boards

SUMMIT JUICE DISPENSER - 3 BOWL

  • Crystal clear polycarbonate, durable 14 litre bowls, individually removable for cleaning
  • Continuous agitation from the paddles avoids foaming and liquid oxidation
  • Thermostat controlled cooling, temperature range +2 to -8?C, Stainless Steel coolers, sealed compressor
  • Free flow dispensing taps, enabling easy flow of any thick pulp juice
  • Control switch can be back or front mounted
    Illuminated front top / back